Filter
Top Products
73
MAINTENANCE
Steering Assembly
The steering assembly of the ATV should be checked periodically for
loose nuts and bolts. If loose nuts and bolts are found, see your Polaris
dealer for service before operating the vehicle.
Camber and Caster
The camber and caster are non-adjustable.
Rear Spring
The rear shock absorber
spring is adjusted by rotating
the adjuster either clockwise
or counterclockwise to
increase or decrease spring
tension.
Accessory springs are avail-
able through your Polaris
dealer.
Throttle Cable Freeplay
Adjust throttle cable freeplay at the handlebar.
1. Slide the boots off the inline cable adjuster sleeve. Loosen the
adjuster locknut.
2. Turn the adjuster until 1/16" to 1/8" (1.5-3 mm) of freeplay is
achieved at the thumb lever. While adjusting freeplay, be sure to flip
the throttle lever back and forth several times.
3. Tighten the lock nut and slide the boots over the cable adjuster until
they touch at the midpoint of the adjuster.
Adjuster
Lock Nut
Sleeve
Boot
Boot