Filter
Top Products
68
MAINTENANCE
Oil and Filter Change
Always change the oil and filter at the intervals outlined in the Periodic
Maintenance Chart beginning on page 60. Always change the oil filter
whenever changing oil.
1. Position the vehicle on a level
surface.
2. Place the transmission in neutral.
3. Lock the parking brake.
4. Start the engine. Allow it to idle for
two to three minutes. Stop the engine.
5. Clean the area around the drain plug.
6. Place a drain pan under the vehicle.
7. Remove the drain plug. Use a 6 mm
Allen wrench.
8. Drain the oil.
CAUTION! Hot oil can cause burns to skin. Do not allow hot oil to contact skin.
9. Reinstall the drain plug with a new sealing
washer. The sealing surfaces on the drain
plug and crankcase should be clean and free
of burrs, nicks or scratches.
10. Torque to specification. See page 66.