Filter
Top Products
71
MAINTENANCE
Lubrication Guide
Check and lubricate all components at the intervals outlined in the Peri-
odic Maintenance Chart beginning on page 67. Items not listed in the
chart should be lubricated at the General Lubrication interval.
The a-arms and upper control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
Item Lube Capacity at
Fluid Change
Inspection Procedure
Engine Oil Polaris Premium 4
Synthetic 0W40
2 qt. (1.9 l) See page 72.
Brake Fluid DOT 4 Only --- See page 30.
Transmission Oil Polaris AGL
Synthetic
Gearcase Lube
32 oz. (948 ml) See page 77.
Demand Drive
Fluid
(Front Gearcase)
Demand Drive
Plus Fluid
9 oz. (265 ml) See page 79.
Front Prop Shaft
Yoke
Polaris Premium
U-Joint Lube
--- Grease fittings (3 pumps
maximum) every 500 miles,
before long periods of stor-
age, or after pressure wash-
ing or submerging.
Front Prop Shaft Yoke