Filter
Top Products
49
Features and Controls
Master Cylinder/Brake Fluid
Check the brake fluid in the master cylinder before each ride. If the fluid level is low add
DOT 4 brake fluid only. Do not overfill. See page 170 for the part numbers of Polaris prod-
ucts.
Hand Brake Fluid Level
1. Position the ATV on a level surface. Position
the handlebars so the master cylinder is level.
2. View the fluid level through the indicator
window on the side of the master cylinder.
3. Maintain the fluid level at or slightly above
the mark near the center of the sight glass. Do
not overfill.
Foot Brake Fluid Level
1. Position the ATV on a level surface.
2. Remove the seat and view the fluid level in the reservoir. Maintain the fluid level
between the maximum and minimum marks.
Fluid Level Mark