Filter
Top Products
45
OPERATION
Pre-Ride Checklist
Failure to inspect and verify that the ATV is in safe operating condition
before operating increases the risk of an accident. Always inspect the
ATV before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/lever travel Ensure proper operation 27
80
Brake fluid Ensure proper level 28
Auxiliary brake Ensure proper operation 30
Front suspension Inspect, lubricate if necessary 67
Rear suspension Inspect, lubricate if necessary 67
Steering Ensure free operation -
Tires Inspect condition and pressure 83
Wheels/fasteners Inspect, ensure fastener tightness 83
84
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 31
69
Coolant level (if applicable) Ensure proper level 78
79
Coolant hoses (if applicable) Inspect for leaks -
Throttle Ensure proper operation 26
114
Indicator lights/switches Ensure operation 24
Engine stop switch Ensure proper operation 25
Air filter, pre-filter Inspect, clean 85
Air box sediment tube Drain deposits whenever visible -
Headlamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
25
88
Brake light/taillight Check operation, apply Polaris dielec-
tric grease when lamp is replaced
91
Riding gear Wear approved helmet, goggles, and
protective clothing
8