Filter
Top Products
110
Maintenance
Transmission Oil Check
The gearcase fill plug is located on the side of the
gearcase on the right side of the ATV. Maintain the
oil level at the bottom of the fill plug hole threads.
Always check and change the oil at the intervals
outlined in the Periodic Maintenance Chart begin-
ning on page 94. Polaris recommends the use of
AGL Synthetic Gearcase Lubricant. See page 158
for the part numbers of Polaris products.
1. Position the vehicle on a level surface.
2. Remove the fill plug.
3. View the oil level through the fill hole.
4. If the level is low, add the recommended oil.
5. Reinstall the fill plug.
Fill Plug
Drain Plug