Filter
Top Products
130
Maintenance
Cylinder Head Torque
Have your dealer check the ATV cylinder head for proper torque at the first service, or after
25 hours.
Vehicle Immersion
If it's impossible to take your ATV to a dealer before starting it, follow the steps outlined
below.
1. Move the ATV to dry land or at the very least, to water below the footrests.
2. Turn the fuel valve off.
3. Check the air box for any water and dry it if water is present.
4. Remove the spark plug.
CAUTION
If your vehicle becomes immersed, major engine damage can result if the vehicle is not thoroughly
inspected. Take the vehicle to your dealer before starting the engine.