Filter
Top Products
155
Maintenance
Drive Chain Slack Adjustment
1. Loosen the four rear housing mount bolts.
2. Loosen the chain adjuster lock nut.
3. Turn the chain adjuster clockwise to 1/4"-1/2"
(6-12 mm) deflection.
4. Tighten the chain adjuster lock nut to 18 ft. lbs.
(25 Nm).
5. Tighten the four rear housing mount bolts to 43
ft. lbs. (60 Nm).
CAUTION
Hold the adjuster stud securely while tightening the jam nuts to avoid breaking the stud.
Housing
Mount
Bolts
Chain Adjuster