Polaris 9921344 Offroad Vehicle User Manual


 
105
MAINTENANCE
Battery
Battery Removal
1. Place the transmission in
gear.
2. Lock the parking brake.
3. Remove the splash shield
behind the right front tire.
4. Remove the left side panel
to access the battery hold-
down bracket. Remove the
screw at the bottom rear of
the bracket and move the
bracket aside.
5. Remove the battery cover.
6. On conventional batteries,
remove the battery vent
tube.
7. Disconnect the black (negative) battery cable first.
8. Disconnect the red (positive) battery cable last.
9. Lift and remove the battery through the right wheel well. If using a
conventional battery, be careful not to tip the battery sideways,
which could spill electrolyte.
WARNING
Improperly connecting or disconnecting battery cables can result in an explo-
sion and cause serious injury or death. When removing the battery, always
disconnect the negative (black) cable first. When reinstalling the battery,
always connect the negative (black) cable last.
CAUTION
If electrolyte spills, immediately wash it off with a solution of one tablespoon
baking soda and one cup water to prevent damage to the vehicle.