Filter
Top Products
77
MAINTENANCE
Lubrication Guide
Check and lubricate all components at the intervals outlined in the
Periodic Maintenance Chart beginning on page 72. Items not
listed in the chart should be lubricated at the General Lubrication
interval.
NOTE: The a-arms and lower control arms are lubricated at the factory, and
no additional lubrication will be needed. However, if these components
are subjected to severe use, grease zerks have been provided for
additional lubrication at the user's discretion.
Item Lube Capacity at
Fluid Change
Inspection
Procedure
Engine Oil PS-4 PLUS Performance
Synthetic 2W-50
2 qt. (1.9 l) See page 78.
Brake Fluid DOT 4 Only --- See page 38.
Transmission Oil Polaris AGL Synthetic
Gearcase Lube
15 oz. (450 ml) See page 82.
Demand Drive
Fluid (Front
Gearcase)
Demand Drive LT
Premium Fluid
9.3 oz. (275 ml) See page 83.
ADC Fluid Polaris ADC Fluid --- See page 86.
Rear Gearcase
Oil
ATV Angle Drive Fluid (or
GL5 80-90 weight gear
lube)
5 oz. (150 ml) See page 84.
Front Prop Shaft
Yoke
Polaris Premium U-Joint
Lube
--- Grease fittings (3
pumps maximum) every
500 miles, before long
periods of storage, or
after pressure washing
or submerging.
Front Prop Shaft Yoke