Filter
Top Products
77
MAINTENANCE
Lubrication Guide
Check and lubricate all components at the intervals outlined in the
Periodic Maintenance Chart beginning on page 72. Items not
listed in the chart should be lubricated at the General Lubrication
interval.
NOTE: The a-arms and lower control arms are lubricated at the factory, and
no additional lubrication will be needed. However, if these components
are subjected to severe use, grease zerks have been provided for
additional lubrication at the user's discretion.
Item Lube Capacity at
Fluid Change
Inspection Procedure
Engine Oil Polaris Premium 4
Synthetic 0W40
2 qt. (1.9 l) Maintain level in safe range
on dipstick. See page 79.
Brake Fluid DOT 4 Only --- Maintain level between fill
lines. See page 38.
Transmission Oil Polaris AGL
Synthetic
Gearcase Lube
32 oz. (948 ml) Maintain level at bottom of fill
hole threads. See page 83.
Demand Drive
Fluid
(Front Gearcase)
Demand Drive LT
Premium Fluid
9 oz. (265 ml) Maintain level at bottom of fill
hole threads. See page 84.
ADC Fluid Polaris ADC Fluid --- Maintain level between fill
lines. See page 86.
Front Prop Shaft
Yoke
Polaris Premium
U-Joint Lube
--- Grease fittings (3 pumps
maximum) every 500 miles,
before long periods of stor-
age, or after pressure wash-
ing or submerging.
Front Prop Shaft Yoke