Filter
Top Products
143
Maintenance
Vehicle Immersion
1. Turn the fuel valve off.
2. Drain water from the air box and clean the air filter. See page 122.
3. Drain the carburetor bowl. See page 125.
4. Remove the spark plug. See page 138.
5. Intermittently and briefly touch the starter button in half-second intervals to SLOWLY
rotate the engine three or four times. Water will eject from the spark plug hole.
(continued on following page)
WARNING
Fluids will be ejected through the spark plug hole and may cause serious injury to face or other body
parts. Stand clear of the spark plug while performing the following steps.