Filter
Top Products
44
FEATURES AND CONTROLS
Instrument Cluster
Your ATV is equipped with an
instrument cluster that senses
vehicle speed from the right front
wheel. The instrument cluster
measures distance in miles as
well as hours of operation. It also
includes a reverse speed limiter
function that limits the ATV's
speed to approximately 7-9 mph.
Refer to page 34 for additional
information.
Miles/Kilometers Toggle
The display in the tripmeter, odometer and speedometer can be changed
to display either kilometers or miles.
1. To change modes, press and release the mode button (see page 31)
as often as needed to reach the odometer mode.
2. In the odometer mode, press and hold the mode button until the let-
ters flash, then release the button.
3. Press and release the button one more time. When the display stops
flashing, the mode has been set.
CAUTION
High water pressure may damage ATV components. Wash the ATV by hand
or with a garden hose using mild soap.
Certain products, including insect repellents and chemicals, will damage the
speedometer lens and other plastic surfaces. Do not use alcohol to clean the
instrument cluster. Do not allow insect sprays to contact the lens. Immedi-
ately clean off any gasoline that splashes on the instrument cluster.