Filter
Top Products
69
MAINTENANCE
Front Gearcase (Demand Drive) Fluid
(if equipped)
Fluid Change
1. Position the vehicle on a level
surface.
2. Place the transmission in gear.
3. Lock the parking brake.
4. Remove the fill plug. Use an 8
mm Allen wrench.
5. Place a drain pan under the
gearcase.
6. Remove the drain plug. Use an 11
mm wrench.
7. Allow the oil to drain completely.
8. Clean and reinstall the drain
plug. Torque to
specification. See page 67.
9. Add the recommended fluid.
10. Reinstall the fill plug.
Torque to specification.
11. Check for leaks.
12. Dispose of used oil properly.