Filter
Top Products
37
FEATURES
MFD Dig ital Display Programs
Engine Program
Hour Meter
The hour meter records the total hours of
engine operation since manufacture. This
meter cannot be reset.
Engine Temperature
A thermometer measures water temperature,
giving an indication of engine temperature.
History Program
The History Program automatically displays
electrical system voltage level and fuel level.
While in the History mode, press the SET button to view maximum
vehicle speed, maximum engine rpm or the current service interval
setting. The gauge a utomatica lly logs the maximum spee d and engine
rpm even if the History Progr am is not curre ntly displayed.
The History Program will display the history of t he Maximum Speed,
Maximum RPM and Service Interval settings.
Maximum Speed/RPM Reset
While in either the MAX MPH or the
MAX RPM mode, press and hold the SET
button for three seconds to reset the
recorded maximum values for both MPH
and RPM. Both of these values are reset
at the same time. Reset the MAX
MPH/RPM values before each run to
obtain accurate readings.
NOTE: Due to electrical noise, t he MFD
may occasionally display MAX
MPH/RPM values that are not
representative of actual values.