Polaris 850 Offroad Vehicle User Manual


 
21
FEATURES AND CONTROLS
Switches
Main Key Switch
End all electrical power to the vehicle.
LIGHTS ON position turns the headlights on.
Start the engine. The headlights are not on in this position.
After starting the engine, release the key switch to the POSITION
LIGHTS ON position.
See page 45 for starting procedures.
Engine Stop Switch
The engine will not start or run when the
switch is in the OFF position.
OFF
RUN
Headlight Switch
The lights do not operate unless the main
key switch is on and the engine stop switch
is in the RUN position.
High Beam
Low Beam
Turn Signal Switch
Push the toggle switch either left or right to activate the
corresponding turn signal light. The indicator on the pod will also
flash. Return the toggle to the center position to end the signal.
Horn Switch
Press the horn switch to sound the horn
Hazard Warning Switch
Push the hazard warning switch to cause all turn signal lights to
flash simultaneously. Use this feature to alert others of an emergency or
other situation requiring caution.
Override
Switch
Engine
Stop
Switch
Headlight
Switch
Horn
Switch
Hazard
Switch
Turn
Signal
Switch