Filter
Top Products
64
PRE-RIDE INSPECTIONS
Before Starting the Engine
Parking Brake Lever Lock
Use the parking brake lever lock only when you want the snowmobile to
remain stationary; for example, when parked on an incline for a period
of five minutes or less.
1. Brake Lever
2. Parking Brake Lever Lock
3. Master Cylinder Reservoir/ Cover
4. Fluid Level Indicator
Lock Engagement
To engage the lock, squeeze the brake
lever tightly and push forward on the
lock. Hold the lock forward while
releasing the brake lever.
TIP:If the brake lever is squeezed tightly enough, the lock will move freely into
place. Do not force the lock or it may break.
The parking brake light will illuminate if the parking brake lever lock is
set while the engine is running. It will also illuminate when the service
brake is in use. If the parking brake light does not come on when the
parking brake or service brake is in use, have it serviced by your dealer.
Lock Release
To release the lock, squeeze the brake lever tightly. The lock will return
to the unlocked position.
WARNING! If the parking brake lever lock is partially or entirely engaged while
riding, the brakes may overheat, resulting in brake damage. In extreme cases it
could cause a fire, which could result in serious injury or death. Always ensure
that the lever lock is completely disengaged before operating the snowmobile.
1
2
3
4