48
OPERATION
Pre-Ride Checklist
Failure to inspect and verify that the vehicle is in safe operating condi-
tion before operating increases the risk of an accident. Always inspect
the vehicle before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/lever travel Ensure proper operation 29
84
Brake fluid Ensure proper level 31
Auxiliary brake Ensure proper operation 30
ADC Fluid Ensure proper level 80
Front suspension Inspect, lubricate if necessary 71
Rear suspension Inspect, lubricate if necessary 71
Steering Ensure free operation -
Tires Inspect condition and pressure 87
Wheels/fasteners Inspect, ensure fastener tightness 87
88
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 33
72
Coolant level (if applicable) Ensure proper level 82
83
Coolant hoses (if applicable) Inspect for leaks -
Throttle Ensure proper operation 28
117
Indicator lights/switches Ensure operation 26
Engine stop switch Ensure proper operation 27
Air filter, pre-filter Inspect, clean 89
Air box sediment tube Drain deposits whenever visible -
Headlamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
27
91
Brake light/tail lamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
95
Dump box latch Check condition and operation of the
mechanism
-
Riding gear Wear approved helmet, goggles, and
protective clothing
8