Polaris 600 Switchback Offroad Vehicle User Manual


 
106
MAINTENANCE
Fall Tune-Up
For maximum performance, arrange for a fall service tune-up with your
Polaris dealer. His experienced and trained service technician will keep
your machine in peak operating condition.
Matte Clear Coat Cleaning
Matte finish products are prone to trapping dirt, oils and other contami-
nants. Polaris Industries rec-ommends cleaning with warm water and a
mild dish detergent. Use a soft sponge to gently rub the surface and rinse
with clean warm water. For stubborn stains such as grease or oil use a
citrus based cleaner (3M Citrus Base Cleaner recommended). Spray
onto the area to be cleaned and rub with a soft sponge. Allow to sit for a
couple of minutes and wash away with clean warm water. Repeat as
necessary to clean the surface.
NOTICE: Never use a polishing/buffing wax or any sponge that has an abrasive
surface. These products will buff the matte surface of the finish result-
ing in a glossy finish. It is not recommended that you clean matte fin-
ishes with a pressure washer as this will further imbed contaminants
into the clear coat and possibly damage the decals.