Polaris 600 Rush-Pro-R Offroad Vehicle User Manual


 
49
THE PERFECT FIT
Suspension Quick Set-Up Guide
POLARIS recommends that riders use this Quick Set-Up Guide to make
any adjustments for rider weight and trail conditions. If additional tun-
ing is needed after you have exhausted all possible adjustments to the
rear shock spring and clicker, refer to the information on the following
pages of this manual.
Factory Suspension Settings
IFS and Front Track Shock
IFS Shock Clicker 6 clicks clockwise from full soft
IFS Shock Spring Preload From body end to spring:
FOX shocks 3.75 inches (9.52 cm)
PRO-R shocks 3.00 inches (7.62 cm)
800 LE shocks 3.00 inches (7.62 cm)
Rebound Clicker (800 LE) 8 clicks clockwise from full soft
Front Track Shock Clicker 2 clicks clockwise from full soft
Front Track Shock Spring Preload 2 inches (5 cm) from body end to spring
Stock Rear Spring
Rear Shock Clicker 4 clicks clockwise from full soft
Rear Shock Spring Preload See Optional Spring Guide (page 48)
Accessory Spring Recommended Initial Settings
Accessory 120 Rear Spring
Rear Shock Clicker 4 clicks clockwise from full soft
Rear Shock Spring Preload See Optional Spring Guide (page 48)
Accessory 260 Rear Spring
Rear Shock Clicker 4 clicks clockwise from full soft
Rear Shock Spring Preload See Optional Spring Guide (page 48)