Filter
Top Products
113
TROUBLESHOOTING
Drive Belt Troubleshooting
Belt Wear/Burn Diagnosis
Causes Solutions
Driving at low RPM S Drive at higher RPMs. Gear the machine down. Check
belt deflection.
Insufficient warm-up S Warm the engine at least five minutes. Take the drive belt
off the machine in extremely cold weather and warm it
up. Break machine loose from the snow.
Towing at low RPM S Do not tow in deep snow. Use fast, aggressive throttle to
engage clutch.
Riding with high RPM
and slow speed (8000
RPM/10 MPH)
S Lower the gear ratio. Reduce RPM. Avoid riding in
high ambient temperatures. Check for snow ingestion.
Ice and snow build-up
between track and
tunnel
S Warm the engine at least five minutes. Take the drive belt
off the machine in extremely cold weather and warm it
up. Break machine loose from the snow.
Poor engine
performance
S Check for fouled plugs or water, ice, or dirt in the gas
tank or fuel line.
Loading machines onto
trailers
S Skis may gouge into trailers and prevent the drivetrain
from spinning properly. Use enough speed to drive the
machine completely onto the trailer. Push and pull it to
finish loading if necessary.
Clutch malfunction S Inspect clutch components. See your dealer.
Slow, easy clutch en-
gagement
S Use fast, aggressive throttle to engage clutch.