Filter
Top Products
89
MAINTENANCE
Lubrication
Chaincase Oil
Oil Change
1. Position the vehicle on a level surface.
2. Remove the drain plug (4) and drain
the oil into a drain pan. Allow the oil
to drain completely.
3. Clean off all metal shavings from the
plug.
4. Install a new sealing washer on the drain plug.
NOTE: The sealing surfaces on the drain plug and the oil tank should
be clean and free of burrs, nicks or scratches.
5. Reinstall the drain plug. Torque to 6-10 ft. lbs. (8-13 Nm).
6. Remove the fill plug. Clean off all metal shavings from the plug.
7. Add 11 oz. (325 ml) of the recommended oil. Do not overfill.
8. Reinstall the fill plug, making sure it is seated properly.
4