72
MAINTENANCE
Periodic Maintenance Interval Table
The following chart is a guide based on average riding conditions. You
may need to increase frequency based on riding conditions. When
inspection reveals the need for replacement parts, always use genuine
Polaris parts, available from your Polaris dealer
.
I - Inspect (clean, adjust, tighten, lubricate, replace if necessary)
C - Clean R - Replace L - Lubricate
Item See
Page
Frequency
150 mi.
(240 km)
500 mi.
(800 km)
1000 mi.
(1600 km)
2000 mi.
(3200 km)
Pre-
Season
CLUTCH
Clutch Alignment Offset
(without belt)
96 III
Drive Belt Condition 97 IIII
Clutches (disassemble) 96 CCC
Belt Tension -- IIII
Clutch Sheaves 96 IIII
ENGINE/COOLING
Engine Mounts -- IIII
Recoil Rope -- IIII
Engine Torque Stop 99 IIII
Cylinder Head Bolts -- III
Cylinder Base Nuts -- III I
Ignition Timing BTDC -- III
VES System -- CCC I
Coolant Level 86 IIRI
Water Pump Drive Belt
(700)
-- IIR
Coolant Hose -- IIII
Heat Exchangers 89 III II
Coolant Circulation -- III
Coolant Leaks -- IIII
Spark Plug Condition 79 IIIRI
Exhaust Pipe 85 II
Exhaust Retaining
Springs
85 IIII