Filter
Top Products
139
TROUBLESHOOTING
EDGE Touring Suspension (ETS)
Problem Solution
Rear suspension bot-
toms too easily
• Adjust RCA forward (see setup decal under hood).
• Adjust coil over spring on front track shock to increase
preload - 1" maximum preload.
• Adjust torsion spring blocks to highest position.
• Increase front track compression damping by turning
screw clockwise (factory position full soft).
• Replace front track spring with optional spring.
Rides too stiff in rear • Check for binding suspension shafts and grease all pivot
points.
• Adjust RCA rearward (see setup decal under hood).
• Decrease spring preload adjustments.
• Decrease front track compression damping by turning
screw counter clockwise (factory position full soft).
Machine darts from
side to side
• Make sure skis are aligned properly.
• Make sure spindles and all steering components are free
turning.
• Make sure skags are straight on skis.
• Ensure use of Accu-Trakt dual skags.
Front end pushes • Check for worn skags
• Increase front IFS preload by adjusting threaded preload
collar.
• Decrease front track spring preload.
Steering is heavy • Check skags and skis for damage.
• Make sure spindles and all steering components are free
turning.
• Decrease IFS spring preload.
• Increase front track spring preload - 1" maximum preload.