Polaris 600 Offroad Vehicle User Manual


 
90
MAINTENANCE
Intake Filters
The intake foam filters limit
snow ingestion into the intake
system. When operating in
loose powder snow, check the
foam filters periodically to
remove any accumulation of
snow.
NOTICE: Operating the snowmobile with the intake filters removed may cause
carburetor icing. The result will be poor fuel economy or carburetor
malfunction. Always reinstall the intake filters before operating the
snowmobile.
Fuel Pump
All fuel pump service must be performed by an authorized Polaris
dealer. Do not attempt to service the fuel pump.
Fuel Filter/Fuel Lines
See your Polaris dealer for replacement of the fuel filter every 1000
miles (or annually).
Inspect the fuel lines regularly for signs of deterioration or damage.
Always check fuel line condition after periods of storage. Normal dete-
rioration from weather and fuel compounds may occur. Replace worn or
damaged fuel lines promptly.
NOTICE: Kinking the fuel lines or using a pliers or similar tools to remove fuel
lines may cause damage to the lines. If a fuel line has been damaged
or kinked, replace it promptly.
+