Polaris 550 Transport Offroad Vehicle User Manual


 
39
THE PERFECT FIT
EDGE 136 Rear Suspension Adjustments
Weight Transfer During Acceleration
The preferred method for controlling
weight transfer during acceleration
is by adjusting the rear rear scissor
stop (RRSS). The factory setting is
the best for most trail riding condi-
tions.
To decrease weight transfer under
acceleration (for improved corner-
ing), rotate the RRSS to a higher
position.
To increase weight transfer or ski lift
during acceleration, move the RRSS
to the rearward hole on high posi-
tion. The RRSS may also be rotated
to a lower position for even more
weight transfer if desired.
Stock Position - This setting is most
desirable for trail riding.
Medium or High Position (standard
hole location) - This setting will
decrease weight transfer.
Rearward Upper Position
(optional hole location - This setting
will increase weight transfer.
NOTE: Your dealer can help you with initial setup and additional setup
instructions to help you achieve your optimum ride. A scissor
stop tool is also available from your dealer.
Medium/High
Stock
Rearward Upper