Filter
Top Products
45
PRE-RIDE INSPECTIONS
Before Starting the Engine
Hood Latches
The hood of the snowmobile protects the operator from moving parts as
well as aiding in sound emission control and other functions. Under no
circumstances should your snowmobile be operated with the hood open
or removed. Always ensure that the hood straps are in good condition
and that the latches are securely in place before operating the snowmo-
bile.
Recoil Rope
Inspect the recoil rope and handle for excessive wear, and make sure the
knot securing the rope inside the handle is secure. If excessive wear is
found, see your POLARIS dealer for replacement.
Pre-Ride Suspension Inspection
Loose nuts and bolts can reduce your snowmobile's reliability and cause
needless repairs and down time. Before beginning any snowmobile trip,
a visual inspection will uncover potential problems. Check the follow-
ing items on a weekly basis or before any long trip.
Item Check Page
Suspension mounting bolts Tightness --
Rear idler wheel bolts Tightness 89
Rear idler adjusting bolt locknuts Tightness --
Torque arm bolts Tightness --
Carrier and bogie wheel bolts Tightness --
Front torque arm limiter strap Condition --
Rail slide Condition 94
Track Tension 88
All rear suspension components Lubrication 66
Ski runner/skag Condition 93
Ski spindle bolts Tightness --
Tie rod end nuts Tightness --