Polaris 500 Touring Quadricycle Offroad Vehicle User Manual


 
29
FEATURES AND CONTROLS
Automatic Transmission Gear Selector
The transmission gear selector
is located on the right side of
the vehicle.
H: High Gear
L: Low Gear
N: Neutral
R: Reverse
P: Park
Whenever the vehicle is left
unattended, always place the
transmission in PARK. The
transmission is locked when
it’s in PARK.
Shifting gears with the engine speed above idle or while the vehicle is moving
can cause transmission damage. Stop the vehicle, release the throttle and move
the shift lever to the desired gear. See your dealer if you experience any shifting
problems.
Passenger Seat
Always make sure the passenger
seat is installed and securely
latched before operating with a
passenger. Test the seat latch by
attempting to pull the seat
upward.
NOTE: If the latch is not working properly, do not allow a passenger to ride the
vehicle. See your Polaris dealer for service.
To remove the seat, pull the latch loop at the rear of the seat. Pull the
seat upward to remove it from the vehicle.
To reinstall the seat, make sure the rubber feet at the base of the seat are
positioned in the rear rack. Press down firmly on the seat pad until the
latch clicks
Gear
Selector
Latch