Polaris 500 H.O. Offroad Vehicle User Manual


 
45
OPERATION
Pre-Ride Checklist
Failure to inspect and verify that the ATV is in safe operating condition
before operating increases the risk of an accident. Always inspect the
ATV before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/lever travel Ensure proper operation 27
78
Brake fluid Ensure proper level 28
Auxiliary brake Ensure proper operation 30
Front suspension Inspect, lubricate if necessary 67
Rear suspension Inspect, lubricate if necessary 67
Steering Ensure free operation -
Tires Inspect condition and pressure 81
Wheels/fasteners Inspect, ensure fastener tightness 81
82
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 31
69
Coolant level (if applicable) Ensure proper level 76
77
Coolant hoses (if applicable) Inspect for leaks -
Throttle Ensure proper operation 26
105
Indicator lights/switches Ensure operation 24
Engine stop switch Ensure proper operation 25
Air filter, pre-filter Inspect, clean 83
Air box sediment tube Drain deposits whenever visible -
Headlamp Check operation, apply POLARIS
dielectric grease when lamp is
replaced
25
86
Brake light/taillight Check operation, apply POLARIS
dielectric grease when lamp is
replaced
89
Riding gear Wear approved helmet, goggles, and
protective clothing
8