Filter
Top Products
39
THE PERFECT FIT
EDGE Rear Suspension Adjustments
Weight Transfer During Acceleration
The preferred method for controlling
weight transfer during acceleration
is by adjusting the rear rear scissor
stop (RRSS). The factory setting is
the best for most trail riding condi-
tions.
To decrease weight transfer under
acceleration (for improved corner-
ing), rotate the RRSS to a higher
position with the scissor stop tool
located in your tool kit.
To increase weight transfer or ski lift
during acceleration, move the RRSS
to the rearward hole on high posi-
tion. The RRSS may also be rotated
to a lower position for even more
weight transfer if desired.
Stock Position - This setting is most
desirable for trail riding.
Medium or High Position (standard
hole location) - This setting will
decrease weight transfer.
Rearward Upper Position
(optional hole location - This setting
will increase weight transfer.
NOTE: Your dealer can help you
with initial setup and addi-
tional setup instructions to
help you achieve your opti-
mum ride.
Medium/High
Stock
Scissor
Stop
To o l
Rearward Upper