66
MAINTENANCE AND LUBRICATION
Periodic Maintenance Chart
Item Maintenance Interval
(whichever comes first)
Remarks
Hours Calendar Miles
(Km)
"
Transmission oil 25 H Monthly 250 (400) Inspect level; change yearly
"
E
Engine breather
filter (if equipped)
25 H Monthly 250 (400) Inspect; clean if needed
"
General
lubrication
50 H 3M 500 (800) Lubricate all fittings, pivots,
cables, etc.
Carburetor float
bowl
50 H 6M 500 (800) Drain bowl periodically and
prior to storage
J
E
Throttle Cable/
ETC Switch
50 H 6M 500 (800) Inspect; adjust; lubricate;
replace if necessary
J
E
Choke cable
(if applicable)
50 H 6M 500 (800) Inspect; adjust; lubricate;
replace if necessary
E
Carburetor air
intake ducts/
flange
(if applicable)
50 H 6M 500 (800) Inspect ducts for proper
sealing/air leaks
Drive belt 50 H 6M 500 (800) Inspect; adjust; replace as
needed
Cooling system
(if applicable)
50 H 6M 1000 (1600) Inspect coolant strength
seasonally; pressure test
system yearly
"
E
Engine oil change 100 H 6M 1000 (1600) Perform a break-in oil
change at one month
"
E
Oil filter change 100 H 6M 1000 (1600) Replace with oil change
J
E
Valve clearance 100 H 12 M 1000 (1600) Inspect; adjust
J
E
Fuel system 100 H 12 M 1000 (1600) Check for leaks at tank cap,
lines, fuel valve, filter, pump,
carburetor; replace lines
every two years
"
Radiator
(if applicable)
100 H 12 M 1000 (1600) Inspect; clean external
surfaces
"
Cooling hoses
(if applicable)
100 H 12 M 1000 (1600) Inspect for leaks
"
Engine mounts 100 H 12 M 1000 (1600) Inspect
Exhaust muffler/
pipe
100 H 12 M 1000 (1600) Inspect
" Perform these procedures more often for vehicles subjected to severe use.
E Emission Control System Service (California)
J Have an authorized Polaris dealer perform these services.