Filter
Top Products
ASSEMBLY
1. Fit middle sections together.
2. Snap 2 middle connectors onto
middle sections as shown.
3.
Place door in base, fitting lower
pin on door into hole in base.
4.
Snap middle section assembly
onto base, fitting upper pin on
door into hole in middle section.
5.
Fit 2 top sections together. Fit top
connectors onto top sections.
(Tabs on connectors fit into holes
in top sections; forks on connectors
fit into slots in top sections.)
6. Snap top section assembly
onto middle section assembly.
7.
Fit lip on track piece into top
slot on base ramp.
8.
Peel and apply labels to the
outside of track as shown.
MMIIDDDDLLEE SSEECCTTIIOONNSS
TTRRAACCKK PPIIEECCEE
MMIIDDDDLLEE CCOONNNNEECCTTOORRSS
LLOOWWEERR
PPIINN
BBAASSEE
TTOOPP
SSEECCTTIIOONNSS
TTOOPP
CCOONNNNEECCTTOORRSS
UUPPPPEERR PPIINN
KKEEYY
DDOOOORR
RRAAMMPP
11
22
33
44