Pharos Science & Applications iGPS-BT II GPS Receiver User Manual


 
V. Precautions
Position fixing may not be available when this receiver is used near high-
voltage wire, electronics equipment that generates electrical noise, or
mobile phones in operation at 1.5 GHz. The noise from PDA or PC may
deteriorate the GPS receiver performance.
Note that some glass material containing metal, such as UV resistant
windows may screen out signals from GPS satellites.
GPS satellites are under the control of the U.S. Department of Defense.
Therefore, services provided for general consumers are subject to change
without prior notice. Pharos is not liable for losses caused by such
changes.
Do not touch the connectors of the Bluetooth Dock with fingers or insert
foreign substances; otherwise, a failure may be caused.
Do not expose the receiver to direct sunlight for a long period of time; near
heating equipment; a place that can become hot, or high levels of
humidity.
Do not expose or submerse the device to moisture, liquids, or harsh
environments to avoid damaging it..
Dropping the receiver, heavy impact, or excess vibration may cause
damage or malfunction.
Use a soft cloth to wipe dirt off this receiver. If dirt is severe, dampen a
soft cloth with diluted neutral detergent, securely wring it out, and wipe off
the dirt. Do not use a spray-type detergent; highly volatile solvent, such
thinner and benzene; or a chemical cloth. Otherwise, deformation or
discoloration may be caused.
VI. Package contents
PT250: Bluetooth Pharos GPS Navigator
TM
Ostia software and street level maps
iGPS-500 receiver
iGPS-BT II Dock with Li-Ion battery
Car charger
Vent mounted PDA Holder
PT120: Bluetooth iGPS Receiver
iGPS-500 receiver
iGPS-BT II Dock with Li-Ion battery
Car charger
Note: Contents may vary - see the box or contents list.
New products may not be listed here.
14