Omron NS10-V2 GPS Receiver User Manual


 
20
21
Item Specifications
USB rating USB1.1
Connector Type A (Host), Type B (Slave)
Performance / Specifications
Item Specifications
Rated power supply voltage
24 VDC
Allowable voltage range 20.4 to 27.6 VDC (24 VDC ±15%)
Power consumption
25 W max. (15 W max. for the NS5)
Ambient operating temperature
0 to 50°C (See notes 1 and 4.)
Storage temperature –20 to 60°C (See note 2.)
Ambient operating humidity
35% to 85% (0 to 40°C) with no condensation
35% to 60% (40 to 50°C) with no condensation
Operating environment No corrosive gases.
Noise immunity Conforms to IEC61000-4-4, 2 kV (power lines)
Shock resistance
(during operation)
Conforms to JIS C0041.
147 m/s
2
3 times each in direction of X, Y, and Z.
Weight
NS12: 2.5 kg max.; NS10: 2.3 kg max.;
NS8: 2.0 kg max.; NS5: 1.0 kg max.
Enclosure rating
Front operating panel: IP65F and NEMA4 compliant
(See note 3.)
Applicable standards cULus and EC directives
Battery life
5 years (at 25°C) Replace battery within 5 days
after the battery runs low (indicator lights orange).
Vibration resistance
(during operation)
Conforms to JIS C0040.
10 to 57 Hz, 0.075 mm amplitude, 57 to 150 Hz,
9.8 m/s
2
30 min each in X, Y, and Z directions
Item NS10-V2
NS5-V2/NSH5-V2
NS8-V2NS12-V2
Display device
High-definition TFT color LCD
TFT color LCD
STN color LCD
Monochrome LCD
Number of dots
800 dot horizontal x
600 dot vertical
320 dot horizontal x
240 dot vertical
640 dot horizontal x 480 dot vertical
Display color
256 colors
Effective
display area
Width 246.0 mm x
height 184.5 mm
(12.1 inches)
Width 215.2 mm x
height 162.4 mm
(10.4 inches)
Width 170.9 mm x
height 128.2 mm
(8.4 inches)
Width 117.2 mm x
height 88.4 mm
(5.7 inches)
Field of vision
Left/right ±60°,
Top 45°, bottom 75°
(See note 1.)
Left/right ±60°,
Top 35°, bottom 65°
Left/right ±65°,
Top 50°, bottom 60°
TFT: Left/right 70°,
Top 70°, bottom 50°
STN: Left/right 50°,
Top 45°, bottom 50°
Monochrome:
Left/right 45°,
Top 20°, bottom 40°
Service life
Brightness
adjustment
Display
panel
Item Specification
Method Resistive membrane
Number
of
switches
1,900 (50 horizontal x 38 vertical) 16 x 16 dots for each switch.
1,200 (40 horizontal x 30 vertical) 16 x 16 dots for each switch.
768 (32 horizontal x 24 vertical) 20 x 20 dots for each switch.
NS12-V2
NS10-V2
NS8-V2
300 (20 horizontal x 15 vertical) 16 x 16 dots for each switch.
NS5-V2/NSH5
Input Pressure-sensitive
Service life 1,000,000 touch operations.
Touch
panel
(Matrix
type)
Item Specifications
Memory card
interface
One ATA-Compact Flash interface slot.
Used to transfer and store screen data and to store history data.
Expansion
interface
For Expansion Interface Units
Backlight
(See note
5.)
Backlight error
detection
50,000 hours min. (See note 2.)
TFT, STN: 75,000
hours min. (See
note 2.)
Monochrome:
50,000 hours min.
(See note 2.)
There are 3 levels that can be set with the touch panel. (See note 3.)
Error is detected automatically, and the RUN
indicator flashes green as notification.
(See note 4.)
Item Specification
Port A
Conforms to EIA RS-232C.
D-Sub female 9-pin connector
5-V output (250 mA max.) through pin 6 (See note.)
Port B
Conforms to EIA RS-232C.
D-Sub female 9-pin connector
5-V output (250 mA max.) through pin 6 (See note.)
Note: The 5-V outputs of serial ports A and B cannot be used at the same time.
Item Specification
Baud rate 2M/1M/500K
Transmission path
Shielded twisted-pair cable (special cable)
Item Specification
Conformance standards
Conforms to IEEE 802.3/Ethernet (10Base-T/100Base-T).
Item NS-CA001 NS-CA002
Resolution 320 x 240, 640 x 480, or 800 x 600 dots User-defined size
NTSC composite
video or PAL
2 cameras + RGB
Input signal NTSC composite video or PAL
Cameras Number of cameras: 4 max.
General Specifications
Characteristics
Note 3: May not be applicable in locations with long-term exposure to oil.
Note 4:
•NS12/NS10/NS5
Mounting angle of 30° to 90° or less to the horizontal: Operating temperature range of 0 to 50°C
•NS8
Mounting angle of 30° to less than 90° to the horizontal: Operating temperature range of 0 to 45°C
Mounting angle of 90° to the horizontal: Operating temperature range of 0 to 50°C
90°
Display surface
30°
Horizontal
(0°)
Note 1: The operating temperature is subject to the following restrictions according to the mounting
angle.
Mounting angle of 0 to 30° to the horizontal: Operating temperature range of 0 to 45°C
When a Video Input Unit or a Controller Link Interface Unit is mounted, the ambient operating
temperature is 0 to 35°C.
Mounting angle of 30 to 90° to the horizontal: See note 4.
Note 2: Operate the PT within the temperature and humidity ranges shown in the following diagram.
Display Specifications
External Interface Specifications
Operating Specifications
Data Capacity Specification
Note 1: The bottom angle is 55° for V1 models.
2: This is the estimated time before brightness is reduced by half at room temperature
and humidity. It is not a guaranteed value. The service life will be drastically shortened
if PT is used at low temperatures. For example, using the PT at temperatures of 0°C
will reduce the service life to approximately 10,000 hours (reference value).
3: The brightness cannot be adjusted much.
4: This function does not indicate that the service life has been reached. It detects when
the backlight is not lit due to a disconnection or other errors. Backlight error detection
indicates that all backlights (2) are OFF.
5: Contact your nearest OMRON representative to replace the backlight.
Communications Specifications
Serial Communications
Controller Link (Wired-type) Specifications
Ethernet Specifications
Video Input Specifications
USB Specifications
60
50
40
30
20
10
0
Temperature (°C)
Temperature (°C)
Humidity (%)
80706050403020100—20
10%
20%
35%
40%
60%
80%95%
Storage
Operation
NS12/NS10/NS8/NS5-V2
NSH5-SQROOB-V2
Item Specification
Rated power supply voltage 24 VDC
Allowable voltage range
20.4 to 26.4 VDC (24 VDC –15%/+10%)
Power consumption 10 W max.
Ambient operating temperature
0 to 40°C
Storage temperature –20 to 60°C
Ambient operating humidity
35% to 85% with no condensation
Operating environment No corrosive gases.
Noise immunity
Shock resistance
(during operation)
Conforms to JIS C0912.
Weight 1 kg max.
Enclosure rating IP65 compliant
Applicable standards UL508 and EC directives
Ground Ground to 100 or less.
Vibration resistance
(during operation)
Conforms to JIS C0911.
Common mode: 1,000 Vp-p (between power
supply terminals and panel)
Normal mode: 300 Vp-p
Pulse width: 100 ns to 1 µs, Rise time: 1-ns pulse
Series
NS5
NSH5
NS8
NS10
NS12
MQ (monochrome)
TQ (TFT)
SQ (STN)
SQ (STN)
TV (TFT)
TV (TFT)
TS (TFT)
6 MB
20 MB
20 MB
20 MB
20 MB
20 MB
20 MB
20 MB
60 MB
60 MB
60 MB
Display device model V 1 V 2
Compatible OMRON PLCs
Specifications PLC model nameModel number
CQM1-CPU41-V1/CPU42-V1/CPU43-V1/CPU44-V1
Specifications PLC model nameModel number
CS1G-CPU42H/CPU43H/CPU44H/CPU45H
CS1H-CPU63H/CPU64H/CPU65H/CPU66H/CPU67H
CS1D-CPU65H/CPU67H
CQM1H-CPU21/CPU51/CPU61
C200HS-CPU21/CPU23/CPU31/CPU33
C200HE-CPU32(-Z) (See note 2.) /CPU42(-Z)
C200HG-CPU33(-Z) (See note 2.) /CPU43(-Z) /CPU53(-Z) (See note 2.) /CPU63(-Z)
C200HX-CPU34(-Z) (See note 2.) /CPU44(-Z) /CPU54(-Z) (See note 2.) /CPU64(-Z) /CPU65-Z/CPU85-Z
CQM1H-CPU61/51 with a CQM1H-SCB41 Serial Communications Board
C200HE-CPU32(-Z) (See note 2.) /CPU42(-Z)
C200HG-CPU33(-Z) (See note 2.) /CPU43(-Z) /CPU53(-Z) (See note 2.) /CPU63(-Z)
C200HX-CPU34(-Z) (See note 2.) /CPU44(-Z) /CPU54(-Z) (See note 2.) /CPU64(-Z) /CPU65-Z/CPU85-Z
CV500/1000/2000-CPU01-V1
CVM1-CPU01-V2/CPU11-V2/CPU21-V2
With RS-232C connector (9-pin type)
Connect to peripheral port.
With RS-232C connector (9-pin type)
With RS-232C connector (switching/9-pin type)
C-series CQM1
CS-series CS1G
CS-series CS1H
CS-series CS1D
CJ1G-CPU42H/CPU43H/CPU44H/CPU45H (See note 1.)
CJ1G-CPU42P/CPU43P/CPU44P/CPU45P
CJ1H-CPU65H/CPU66H/CPU67H (See note 1.)
CJ1M-CPU11/CPU12/CPU13/CPU21/CPU22/CPU23 (See note 1.)
CJ-series CJ1G
CJ-series CJ1H
CJ-series CJ1G
CJ-series CJ1M
C-series CQM1H
C-series C200HE(-Z)
C-series C200HG(-Z)
C-series C200HX(-Z)
C-series C200HS
C-series C200HE (-Z)
C-series C200HG (-Z)
C-series C200HX (-Z)
CVM1/CV-series
CVM1 or CV500/
CV1000/CV2000
C-series CQM1H
CPM1-10/20CDR- +CPM1-CIF01 C-series CPM1
C-series CPM1A
C-series CPM2A
C-series CPM2C
Connect to RS-232C or peripheral port.
With RS-232C connector (9-pin type)
Note 1: Use an Adapter Cable (CPM2C-CN111 or CS1W-CN114/118), CPM1-CIF01 RS-232C Adapter, or CPM1-CIF11 RS-422A Adapter to connect.
2: A C200HW-COM02(-V1), C200HW-COM04(-V1), C200HW-COM05(-V1), or C200HW-COM06(-V1) Communications Board is required.
Note 1: The CJ1W-SCU21/SCU41 Serial Communications Unit can also be connected.
2: A C200HW-COM02/COM04/COM05/COM06(-V1) Communications Board is required.
CPU Units (1:1 NT Link Connection)
CPU Units (1:N NT Link Connection)
CPM2C-10/20 - (See note 1.)
CPM2A-30/40/60CD - +CPM1-CIF01
CPM1A-10/20/30/40CD - +CPM1-CIF01
SpecificationItem
Rough
Vector font
(text objects only)
Alphanumeric characters
or Japanese katakana
Displayable characters
Raster font
Display
text
8 x 8
Base size
1 x 1, 1 x 2, 2 x 1,
2 x 2, 3 x 3, 4 x 4, 8 x 8
Alphanumeric characters
or Japanese, Chinese
(Simplified, Traditional)
or Korean
Alphanumeric characters
or Japanese katakana
Japanese kanji
8 x 16
16 x 16
16 x 32
32 x 32
1 x 1, 1 x 2, 2 x 1,
2 x 2, 3 x 3, 4 x 4, 8 x 8
1 x 1, 1 x 2, 2 x 1,
2 x 2, 3 x 3, 4 x 4, 8 x 8
Standard
Font
name
Fine
Color
Text
attributes
Flicker
256 colors
Can be specified in CX-Designer.
Font, style, and size can be specified.
Font style (only when
vector font is specified)
Bold or italic
Vertical alignment Top, center, or bottom
Horizontal alignment
Left-justified, centered, or right-justified
Numeral units and scale settings
1,000 max.
Alarm/event settings 5,000 max.
Display colors 256 colors max. (32,768 colors for BMP)
Objects
that can
flicker
Up to 10 types can be registered.
The flicker speed and flicker range can be set.
Functional
objects
Fixed
objects
Select from 3 types.
The flicker speed and flicker range are fixed.
Display Element Specifications
CX-One Operating Environment
Recommended memory
256 Mbytes min. (See note 2.)
Hard disk free space
Approx. 1.8 GB or more available space is required to install
the complete CX-One package.
CD-ROM drive Required for installation
Display
SVGA (800 x 600) or better high-resolution display with 256 colors min.
Compatible OS
Recommended CPU
Pentium II 333 MHz or faster processor (Pentium III 1 GHz or
faster recommended.)
Windows 98 SE, Me, NT 4.0 (Service Pack 6a), 2000 (Service
Pack 3 or higher), or XP (See note 1.)
Note 1: CX-One OS precaution
The CX-One will not run on Microsoft Windows 95 or any other OS not listed above.
If such an OS is being used on the client computer, the OS must be upgraded before installing the
CX-One. System requirements and hard disk space may vary with the system environment.
2: The amount of memory required varies the Support Software applications used in CX-One.
Refer to use documentation for Individual Support Software for details.