Filter
Top Products
Piston-
Type Solenoid Valves cover most industrial applications. A two-way valve controls the flow of
fluid through a single passage. It has two ports, an inlet and an outlet. A normally closed valve
does not pass fluid unless it is energized. There is fail safe positive valve closing in the event
of power failure that prevents flooding or overfilling.
These valves cover a wide range of operating pressures and temperatures. 5 PSI to 150 PSI
pressure and temperatures to 195°F affords broad application and tremendous flexibility. The
long life bronze castings and waterproof coils insure performance consistency for a long life.
Since the valves are very rugged, they provide low incidence of down time and maintenance.
Minimum pressure drop internal design of this valve assures exceptional flow performance.
FSV200
Series Two-Way Normally Closed Pilot Operated
FSVIOO
and
(1)
Operator’s Manual (1)
If you have any questions about the shipment, please call OMEGA Customer Service Depart-
ment. When you receive the shipment, inspect the container and equipment for signs of dam-
age. Note any evidence of rough handling in transit. Immediately report any damage to the
shipping agent.
NOTE
The carrier will not honor any claims unless all shipping
material is saved for inspection. After examining
and removing contents, save packing material and carton
in the event reshipment is necessary.
1.2 Description
The OMEGA@
.l
Unpacking
Remove the Packing List and verify that you have received all equipment, including the follow-
ing (quantities in parentheses):
General Purpose Solenoid Valve
Chapter 1 Introduction
1