Filter
Top Products
LOADING THE BATTERY
Use one 3V lithium battery (CR2).
1. Slide the battery compartment
cover release ( ) and open the
cover ( ).
2. Load the battery and align the
and ends correctly.
3. Turn the lens barrier switch ( ) to
turn on the camera. If the battery
check lamp starts blinking, replace
the battery ( ). About 15 rolls of
film can be used with one new 3V
lithium battery (when the flash is
used on half of pictures).
Notes:
• Dispose of used batteries in the battery
recycling boxes at stores selling batteries.
•
If lithium batteries are not fully discharged,
protect them against short-circuiting (e.g., by
taping the contacts) before disposal.
8