Nissan 2008 Altima Automobile User Manual


 
To set cruisingspeed, accelerate the vehicle to
the desired speed, push the COAST/SET switch
and release it. The SET indicator light in the
instrument panel comes on. Take your foot off the
accelerator pedal. Your vehicle maintains the set
speed.
To pass another vehicle, depress the ac-
celerator pedal. When you release the
pedal, the vehicle returns to the previously
set speed.
The vehicle may not maintain the set speed
when going up or down steep hills. If this
happens, drive without the cruise control.
To cancel the preset speed, use one of the
following three methods.
Push the CANCEL button; the SET indicator
light in the instrument panel goes out.
Tap the brake pedal; the SET indicator light
goes out.
Turn the main switch off. Both the CRUISE
indicator light and SET indicator light in the
instrument panel go out.
The cruise control is automatically canceled and
the SET light in the instrument panel goes out if:
you depress the brake or clutch pedal while
pushing the ACCEL/RES or SET/COAST
switch. The preset speed is deleted from
memory.
the vehicle slows down more than 8 MPH
(13 km/h) below the set speed.
you depress the clutch pedal (manual trans-
mission), or move the shiftselector lever to N
(Neutral) (CVT).
To reset at a faster cruising speed, use one
of the following three methods.
Depress the accelerator pedal. When the
vehicle attains the desired speed, push and
release the COAST/SET switch.
Push and hold the ACCEL/RES switch.
When the vehicle attains the speed you de-
sire, release the switch.
Push and release the ACCEL/RES switch.
Each time you do this, the set speed in-
creases by about 1 MPH (1.6 km/h).
To reset at a slower cruising speed, use one
of the following three methods.
Lightly tap the brake pedal. When the ve-
hicle attains the desired speed, push the
COAST/SET switch and release it.
Push and hold the COAST/SET switch. Re-
lease the switch when the vehicle slows to
the desired speed.
Push and release the COAST/SET switch.
Each time you do this, the set speed de-
creases by about 1 MPH (1.6 km/h).
To resume the preset speed, push and re-
lease the ACCEL/RES switch. The vehicle re-
turns to the last set cruising speed when the
vehicle speed is over 25 MPH (40 km/h).
5-18 Starting and driving
REVIEW COPY—
2008 Altima (alt)
Owners Manual—USA_English (nna)
02/13/08—debbie