Nextar 43NT GPS Receiver User Manual


 
7
Power Adaptor
Using the Power Adaptor
The GPS unit is supplied with a DC Power Adaptor for charging the internal battery and
for powering the unit while in a vehicle.
Connect the Power Adaptor USB plug to the unit’s USB port and plug the other end to
the vehicle’s 12V accessory/ cigarette socket.
Attention
Set up your destination and other settings before moving out into traffic.
Do not access the controls of the GPS unit while driving.
Mount the unit so that it does not obstruct your view of the road.
About Rechargeable Battery
Your portable GPS device comes with a built-in rechargeable Lithium-Ion battery. Charge
the battery fully before initial use. Charging time is normally about 3.5 hours. A fully
charged battery delivers about 2 hours of use. It is recommended to use the Power
Adaptor while in the vehicle.
Working conditions and precautions for the rechargeable battery
Battery should only be used and charged when temperatures are between
32°-100°F.
Maintain well-ventilated conditions around the product to avoid overheating. Do not
put the product on a blanket, clothing or anything that may block ventilation to the
product.
When the battery is weak, an indication symbol will appear on the LCD screen and
the unit will power off automatically after a few minutes.