New Holland FM-750 GPS Receiver User Manual


 
10 11
INTEGRATED GUIDANCE
AUTOPILOT™ RETROFIT INSTALLATION
AUTOPILOT – PRECISION YOU DEMAND
The Autopilot™ automated steering system used with an RTK signal will give a +/-2.5 cm repeatability from plant to
harvest with any field pattern. The AutoPilot™ system can be integrated into most brands of tractor and harvesting machinery.
Using the machine’s electro hydraulic circuit to provide automatic guidance, this retrofit solution will significantly
increase your efficiency during field preparation, planting and harvesting by driving more accurately and consistently
during extended periods behind the wheel.
IMPLEMENT GUIDANCE AND RTK INCREASE YOUR ACCURACY AND YIELDS
Thanks to a DGPS antenna mounted on the implement, the TrueGuide™ & TrueTracker™ systems keep your implement
on a repeatable path on sloped fields with steep gradients. Retrofit installation kits are compatible with all manufactures’
implements.
TRUE GUIDE – IMPLEMENT CONTROL
The TrueGuide™ implement guidance system uses
the existing Autopilot™ system to improve implement
accuracy. There is no need to hang additional
steering equipment on the implement just to get
better control. Let the tractor guide the implement.
Minimise the downdraft effect on severe hillsides. Let
your Autopilot system pull the implement up the hill
and hold the line. FM-1000 compatible.
TRUE TRACKER – TAKE FULL CONTROL
The TrueTracker™ system is an independent
navigation system that works with the Autopilot
system to provide you the highest level of accuracy.
The TrueTracker system independently steers the
implement using one of many hydraulic solutions on
a repeatable path even on extreme slopes and
variable soils. Maintain accuracy on rolling terrain
using T3™ terrain compensation technology mounted
on the implement. FM-1000 compatible.
EZ-REMOTE
The EZ-Remote joystick mounts to any tractor
console, providing an even more convenient way to
control a variety of guidance display functions from
the cab.
Enhances a wide range of tasks, from basic
guidance operations to more advanced operations
like manual offset of the scraper in field levelling
applications.
DISPLAY
FM-750 or FM-1000 delivering down to
+/-2.5 cm GPS accuracy with RTK technology.
NAVIGATION CONTROLLER II
The industry leading T3™ terrain compensated
corrections (roll + pitch + yaw) and precise
steering instructions to the vehicle by using
guidance and DGPS information from the
FM-1000™ or the FM-750™
AUTOSENSE™ STEERING SENSOR
This unique steering sensor measures highly
accurate wheel angle information on all terrain
and sends it to the Navigation Controller II
providing faster correction and increased
steering accuracy.
ANTENNA
Mounts on to the tractor, combine or implement
to provide up to +/-2.5 cm pass-to-pass and
year-to-year accuracy
VEHICLE INTERFACE
Receives navigation commands from the
Navigation Controller II which controls the
vehicle’s steering when engaged.
RTK BASE STATION
An RTK base station includes a DGPS antenna,
receiver and radio link to provide RTK correction
signals to the auto-guidance system.