Filter
Top Products
PAGE 18 — WBH16/WBH16E POWER BUGGY (S/N 110401 & UP) • OPERATION AND PARTSMANUAL — REV. #0 (06/14/11)
PARKING BRAKE CHECK
Check the brakes as outlined in the maintenance section
of this manual.
LINKAGE CHECK
Check and make sure that all linkages within the buggy are
functioning correctly.
STEERING CHECK
1. Check and make sure that the power buggy's steering
turns freely and that there is no binding.
2. Make sure that the zerk fitting for the steering has
been lubricated.
DUMP CYLINDER CHECK
1. Check the power buggy's dump cylinder as outlined in
the operation section of this manual.
2. Make sure that both zerk fittings for the dump cylinder
have been lubricated.
HYDRAULIC OIL CHECK
3. Visually read the hydraulic sight glass (Figure 7) to see
if the hydraulic oil level is low.
4. If the hydraulic oil is low, add enough hydraulic oil to
bring oil level to a normal safe operating level.
Figure 7. Hydraulic Sight Glass
INSPECTION