Multiquip MT54F Automobile Parts User Manual


 
PAGE 10 — MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12)
Definition of Tamping Rammer
The Mikasa MT-54F tamping rammer is a powerful compacting
tool capable of applying a tremendous force in consecutive
impacts to a soil surface. Its applications include soil compacting
for road, embankments and reservoirs as well as backfilling for
gas pipelines, water pipelines and cable installation work.
The impact force of the MT-54F levels and uniformly compacts
voids between soil particles to increase dry density.
Circular motion is converted to create impact force. The MT-54F
tamping rammer develops a powerful compacting force at the
foot of the rammer. To maintain optimum performance, proper
operation and service are essential.
Construction of Tamping Rammer
The Mikasa MT-54F Tamping Rammer is equipped with an Robin
air cooled, four cycle gasoline engine. Transmission of the power
takes place by increasing the engine speed to engage the
centrifugal clutch.
Rammer Gearbox and Spring Cylinder
The Mikasa MT-54F uses an oil bath lubrication system. Always
check the oil level through the oil level sight glass at the rear of
the tamper foot.
Controls
Before starting the MT-54F Tamping Rammer, identify and
understand the function of the controls, see Figure 1 on page 11.
GENERAL INFORMATION