Filter
Top Products
Steve Millen Sportparts, Inc. - 3176 Airway Avenue - Costa Mesa, CA 92626 - Phone. 714-540-5566 - Fax. 714-540-5784 - www.stillen.com
402880_ 95-97 Eclipse-Talon Turbo.doc rev. 01/14/04 Page 2 of 2
c. The bracket should be attached with the bend in the bracket towards the front of the Hi-Flow adapter.
5. Install the Hi-Flow assembly.
a. Insert the airflow sensor into its original intake tube.
b. Align the bracket to two of the threaded holes originally used to secure the lower housing.
c. Tighten the hose clamp and the bracket mounting bolts.
d. Re-connect the sensor to the harness.
Note: Once the MAS connector is disconnected, do not start vehicle, Check Engine Light will go on and will need to be
reset by a dealer!!!
6. Install the K&N filter using the clamp supplied with the filter.
7. DONE!