Meyer 4116 Automobile Accessories User Manual


 
INTRODUCTION
Congratulations on the purchase of your new
Meyer Quick Dump Rear Unload Box. This is
the simplest, most flexible system on the
market today. With proper operation and pre
-
ventative maintenance it will last for years.
This SAFETY ALERT SYMBOL
means ATTENTION! BE CAREFUL! YOUR
SAFETY IS INVOLVED! It stresses an atti
-
tude of HEADS UP FOR SAFETY. When
you see this symbol, be alert to the possibility
of PERSONAL INJURY and carefully read
the message that follows.
WARNING: NEVER OPERATE
WITHOUT ALL COVERS, SHIELDS AND
GUARDS IN PLACE. KEEP HANDS, FEET
AND CLOTHING AWAY FROM MOVING
PARTS. SOME COVERS AND GUARDS
HAVE BEEN REMOVED FOR ILLUSTRA-
TIVE PURPOSES ONLY IN THIS MANUAL.
FAILURE TO HEED MAY RESULT IN SERI-
OUS PERSONAL INJURY OR DEATH.
At the front of this manual is a Product Regis-
tration and Inspection Certificate. Be sure
your dealer has completed this certificate
and forwarded a copy to the manufacturer to
validate the manufacturer’s warranty. The
product model and serial number are re
-
corded on this certificate for your conve
-
nience and for proper identification of your
dump box by your dealer and the manufac
-
turer when ordering repair parts. The serial
number tag is found on the left rear drive
frame plate and is also stamped near the
PTO shaft hanger bracket on the left front up
-
right.
All references to right hand (RH), left hand
(LH), front and rear apply to the product as
viewed looking at the rear of the box.
For information on ordering repair parts, re
-
fer to the repair parts section of this manual.
Orders must list the complete description,
correct part number, and total amount re
-
quired.
You are urged to study this manual and fol-
low the instructions carefully. Your efforts will
be repaid in better operation and service as
well as a savings in time and repair expense.
Failure to read this manual and understand
the machine could lead to serious injury. If
you do not understand instructions in this
manual, contact either your dealer or Meyer
Manufacturing Corp. at Dorchester, WI
54425.
This supercedes all previous published in
-
structions.
Meyer Mfg. Corp. warrantsnew Meyer’s quickdump rear unload boxesto be free fromdefects in material andworkmanship
under normal recommended use and service, as stated in the operator’s manual, as follows:
1. Meyer Mfg. willrepair or replaceF.O.B. Dorchester, WI,as Meyer Mfg.elects, any partof a newMeyer’s dump boxwhich
is defective in material or workmanship.
a. Without charge for either parts or labor during the first year following delivery to the original retail customer, and;
b. Without charge for parts (not labor) during the second year following delivery to the original retail customer.
2. In addition to the above basic warranty, Meyer Mfg. will replace or repair, F.O.B. Dorchester, WI as Meyer’s elects;
a. Anyaluminized or galvanealpainted steel panelwhich comprises thesides andrear of thebox portion ofthe dump box,
upon evidencesatisfactory to MeyerMfg., that anysuch panels eitherrusted orcorroded through orcracked, or splitas a re
-
sult of a defect in material or workmanship.
b. Thewarrantyon aluminizedand galvanealsteel panelsshall applyduring thefirst 10years followingdeliveryto theorig
-
inal retail customer.
3. Warranty forms must be completed and returned to Meyer Mfg. for this warranty to be valid.
4. This warranty is effective on all sales of Meyer dump boxes made after 1-1-1986.
5. This warranty is the sole and exclusive warranty which is applicable in connection with the manufacture and sale of this
product and Meyer Mfg. Corp. responsibility is limited accordingly.