Filter
Top Products
PRE-OPERATION
Be sure your dump box is properly mounted
to the running gear. Consult your dealer if
you have any questions about the tie down
kit from the manufacturer and illustrated in
the parts listing of this manual.
This dump box is to be operated with 540
rpm PTO only. Set your tractor drawbar to
conform to the standard dimensions shown
on figure 1. This will ensure that the PTO
drive shaft will not be over extended.
DANGER: DO NOT OPERATE
WITHOUT PTO GUARD ON MACHINE
AND ON TRACTOR. MAINTAIN PTO
DRIVE SHAFT GUARD TUBES IN OPER-
ATING CONDITION. REPLACE THEM IF
DAMAGED AND NOT TURNING FREELY.
FAILURE TO HEED MAY RESULT IN SERI-
OUS PERSONAL INJURY OR DEATH.
WARNING: INSPECT REGULARLY
THAT ALL CONNECTIONS AND BOLTS
ARE TIGHT AND SECURE BEFORE OP
-
ERATING. FAILURE TO HEED MAY RE
-
SULT IN SERIOUS PERSONAL INJURY
OR DEATH.
Inspect all adjustments on the machine to be
sure they are proper and to provide maxi
-
mum performance. Lube the machine if it is
required.
WARNING: DO NOT OPERATE
WITHOUT ALL SHIELDS, GUARDS AND
COVERS INSTALLED. FAILURE TO HEED
MAY RESULT IN SERIOUS PERSONAL IN
-
JURY OR DEATH.
Before operation and after hitching the trac-
tor to the wagon, connect the PTO. Slowly
engage the tractor PTO and operate box at
idle speed to ensure it is operating properly.
Page 7
FIGURE 1. DRAWBAR & PTO
RELATIONSHIP
FIGURE 2. DUMP BOX