Filter
Top Products
99-8223 KIT ASSEMBLY
3
A
B
C
D
ISO MOUNT RADIO WITH POCKET PROVISION
Slide the Radio Housing Brackets onto
the sides of the Radio Housing until the
side clips engage. NO
TE: Tabs are
marked Left and Right.
(Figure B)
2
Mount the ISO Brackets to the radio
using the screws supplied with the
radio.
(Figure C)
3
Slide the radio into the radio housing
until it snaps into place.
(Figure D)
4
Snap the Trim plate onto the front of
the Radio Housing.
(Figure D)
5
Attach the clips removed from the fac-
tory radio to the back of the radio
housing trim plate.
(Figure A)
1
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.