Filter
Top Products
5
Kit Assembly 99-7954
1. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Mount the ISO brackets to the radio
with the screws supplied with the radio.
(Figure A)
3. Slide the radio into the radio housing
until it snaps into place. (Figure B)
4. Snap the ISO trim plate onto the front of
the radio housing. (Figure B
5. Snap the pocket into the radio housing.
(Figure C)
6. Reassemble dash in reverse order
of disassembly.
ISO mount radio provision with pocket
(Figure A)
(Figure B)
(Figure C)