Filter
Top Products
4
99-7864 KIT ASSEMBLY
B
A
ISO RADIO PROVISION
Slide the head unit into the radio
opening until the side clips engage.
Snap the Trim plate into the Radio
Housing
.
(Figure B)
2
Continue to final assembly.
*
Note: Refer also to the instructions included with the aftermarket radio.
Mount the ISO Brackets to the head
unit with the screws supplied with
the unit.
(
Figure A)
1
NOTE:
When reinstalling the screws
into the bottom of the 99-7864
use the (2) supplied Phillips
screws instead of the factory
screws removed in step 5 in
Dash Disassembly.
Programming:
In order to adjust the 99-7864 to
the different types of radios
available in the Honda Accord,
the 99-7864 has a program
feature.
2 DOOR COUPE ONL
Y:
To program the kit you will need
to start your vehicle then hold
the Rear Defrost button for
approximately 5 seconds or until
the light starts to blink.The cli-
mate controls will be pro-
grammed when the light stops
blinking.
4 DOOR SEDAN ONL
Y:
To program the kit you will need
to start your vehicle then hold
the A/C button for approximately
5 seconds or until the light starts
to blink.The climate controls will
be programmed when the light
stops blinking.
Note:
The orange wire coming out of
the back of the 99-7864 needs to
be connected to the orange illu-
mination wire coming from the
Metra 70-1721 wire harness (sold
separately).