Filter
Top Products
7
99-7604 KIT ASSEMBLY
B
C
A
DOUBLE DIN RADIO PROVISION
Snap the Double DIN brackets to the
inside edge of the radio housing.
(Figure B)
2
1
Slide the Double DIN radio into the
bracket/trim plate assembly and
secure the radio to the assembly using
the screws supplied with the radio.
(Figure C)
3
Snap the Double DIN trim plate into the
radio housing.
(Figure C)
4
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
Cut and remove the center bar from
the radio housing.
(Figure A)