Filter
Top Products
13
99-6510
KIT ASSEMBLY
Cut and remove center divider in
radio housing.
(Figure A)
1
Snap the DDIN brackets to the
inside edge of the radio housing.
(Figure B)
2
Slide the stacked ISO DIN radio
units into the DDIN bracket/radio
housing assembly and secure the
unit to the kit using the screws
supplied with the units.
(Figure C)
3
STACKED ISO UNITS PROVISION
A
B
C
D
Snap the DDIN trim-plate onto the
housing/radio assembly.
(Figure D)
4
Continue to final assembly.
5