Filter
Top Products
5
99-8211
FINAL ASSEMBLY
A
Locate the factory wiring harness in the dash.
Metra recommends using the proper mating
adapter and making the connections as shown.
(Isolate and individually tape off the ends of
any unused wires to prevent electrical short
circuit)
Re-connect the negative battery terminal and test
the unit for proper operation.
A) Strip wire ends back 1/2"
B) Twist ends together
C) Solder
D) Tape
1
2
Reassemble radio and dash assemblies in
reverse order of disassembly.
3
B
C
D